The You can modify the internal settings of the node can be changed from using PicoManager®.
| 目次 |
|---|
...
To individually modify settings
...
To change settings such as backhaul or access point settingsconfigurations, select a node from the menu and click the "Select" buttongo to the menu and select "Show Node Settings" to display the settings for each node.
Choose the desired node and click.
The information set for specific to the selected node will be displayed.
After entering Enter the necessary information, and click the "Save" button to display the , which will prompt a dialog box.
The "Apply" button is used only saves for saving the settings and works . It will continue to operate with the settings before modification. Restarting or reloading the settings will start the operation with the changed settings.
In the "Immediately apply" mode, the settings are saved and reloaded at the same time. When reloading the settings, the backhaul and access point functions are temporarily stopped.
...
previous settings until a reboot or configuration reload is performed, at which point it will start functioning with the updated settings.
The "Apply Immediately" option performs both saving the settings and reloading the configuration simultaneously. When the configuration is reloaded, the backhaul or access point functionality will temporarily stop.
To make bulk changes using templates
If you want to use apply common settings for to multiple nodes, create a node configuration settings template in advance.
To create a node configuration settings template, go to the menu and select "Node Configuration Templates" in the menu, and click on Settings template" and then click the "Create New Configuration Template" icon.
The A dialog box titled "Create New Configuration Template" dialog box will appear. Select the type of template to be created from the combination of the desired template type based on the product and firmware in questioncombination you are working with.
...
Template for AP registers The AP template is used to register settings related to access points.
The System template for System is used to register settings related to system settings configuration and PicoManager® related functionsfeatures.
Select one of the templates, enter the desired settings, and click the "Save" button.
...
Edit Setting Template
To modify a registered node configuration settings template, click on the "Edit Configuration Setting Template" icon.
The "Edit Configuration Setting Template" dialog box will appear.
...
Enter the desired settings and click the "Save" button.
Apply Setting Template
To apply a registered node configuration template to a node, click on the "Apply Configuration Setting Template" icon.
The "Select Target Node to Apply Template" dialog box will appear, select the node to apply the template to, and click the "Apply" button.
...
The "Apply" button only saves the settings and operates with the settings before the change. Restarting or reloading the settings will start the operation with the changed settings.Immediate" saves and reloads the settings at the same time. When reloading the settings, the backhaul and access point functions are temporarily stoppedprevious configuration. To start operating with the updated settings, you need to perform a reboot or configuration reload.
The "Apply Immediately" option saves the settings and performs a configuration reload simultaneously. During the configuration reload, the backhaul or access point functionality temporarily stops.